JENOPTIK - VOTAN™ G Glass Laser Cutting Machines
Laser Processing of Flat Glass:
Advantage of the TLS- Process
Laser Processing of Float Glass:
Float Glass system configuration
Laser cutting of flat glass
3D laser free shape cutting
Laser trimming of glass fibers
Laser structuring and marking
Industrial cutting of flat glass
Process:
separating, structuring
Materials:
soda lime glass
aluminum silicate glass
borosilicate glass
lead glass
cutting speed:
up to 350 mm/s
Accuracy:
±25 μm for 2m
Process:
separating, structuring
Materials:
soda lime glass
aluminum silicate glass
borosilicate glass
lead glass
cutting speed:
up to 350 mm/s
Accuracy:
±25 μm for 2m
No micro- cracks along the cutting edge
• increased strength of the cutting edge
• improved flexural strength (>2 times higher)
No material ablation, no splinters
• no glass dust on the surface of the material
• no further processing steps needed
• suitable for clean room application
• increased strength of the cutting edge
• improved flexural strength (>2 times higher)
No material ablation, no splinters
• no glass dust on the surface of the material
• no further processing steps needed
• suitable for clean room application
Industrial cutting of float glass
- no pre-cut at the float bath - significant saving of glass
- Absolutely ablation free cutting of glass
- less dust from breaking
- no cutting fluid required
- less expenditure on washing
- very good, crack free cutting edge without spalling/ improved edge strength
- improved flexural strength (>2 times higher)
- low investment and operating costs
- cutting technology suitable for soda lime glass from 0.4mm to 19mm
- can be integrated in existent float glass lines
- low footprint size
- online process monitoring