JENOPTIK - VOTAN™ C Plastic Laser Cutting Machines
Task:
Cutting of small 3-dimensional plastic parts
Task:
Contour cuts from small to medium size plastic parts
Solution:
Laser cutting system with stationary Laser and fixed cutting head
Solution:
Laser robot system with stationary Laser and fully integrated beam guide by robot
Field of use:
Cutting of gates, lugs of small plastic parts e.g. green bodies, cup-holders
Field of use:
Cutting of e.g. instrument panels, door panels, A-, B-, C- and D- Columns
Task:
Contour cuts of large to very large 3- dimensional plastic parts
Task:
Contour cuts from small to medium- size plastic parts with online control of the cutting process
Solution:
5 axis movement system with stationary laser
Solution:
Online monitored laser cutting system with stationary laser, handling robot and fixed cutting head
Field of use:
Cutting of e.g. instrument panels (IP's), fridge interior panels, large-size parts
Field of use:
Cutting of safety relevant plastic parts, e.g. IP substrate material
Laser cutting systems from JENOPTIK use two different technologies, depending on the cutting task.
Cutting by sublimation:
The material evaporates when the laser beam is of sufficient intensity
Fusion cutting:
The material melts and the melt is expelled by the working gas.
- Zero- contact, zero- force operation with defined geometry and heat
- Zero- wear operation of the laser beam
- Cutting contour and cut- in geometry are freely programmable
- Saves several processing steps because neither reparation nor re- work are required
- Cutting edges of thermoplastic materials, esp. multi-layer materials and sandwich composites are sealed
- Glass fibers and glass fiber reinforced materials are cut through by the laser beam and the cutting edge is fused
